Tag Archives: Marketing

Know Before You Go: Trade show optimization for Market and Product managers

Set up

I was reviewing my travel calendar and saw that the Spring season of Medical Congresses was coming up when it occurred to me that I had not dealt with tradeshows planning nor attendance conduct for product and marketing managers. Reviewing this topic in my mind, I have decided to break up the lessons learned into multiple posts.

 

If you have been following this blog for a while, you will recognize a common theme. 

 

Background

For a national level tradeshow, the direct budget will range from $80,000 to $2 million. Even the lower end of that range could be a considerable percentage of a marketing department budget, add in the indirect costs of travel at $600 per day per attendee, and for any company, a floor presence is a significant investment.  Without taking into account the opportunity cost of non-selling days for salesforce attendees, it is evident that tradeshow attendance is a significant commitment of time and resources. The key is to think of the expense as an investment. All investments are measured on their projected and actual return (ROI); tradeshows are no different.

 

For a company to “just attend” a congress will make for an expensive social gathering, which can have value but is a low return on the cost of attending. To realize a significant return on your tradeshow investment will require crystal clear goals with metrics. I typically look at the number and quality of customer engagements, the daily and total cumulative number of sales leads, the duration of time to follow-up all leads, the total dollars in new business that results from those leads, and finally look at the overall ROI, as a start. 

 

This introduction and explanation are enough for now on the macro aspects of tradeshows. The point of this post is optimizing the micro (personal) level of tradeshow attendance.

 

Personal responsibility

There is also a micro side of optimizing tradeshows, the individual attendees; this is particularly true for market and product managers. Know your objectives before you go. Write them out and tape them to your hotel room’s bathroom mirror, seeing them every morning and evening will reinforce and guide your daily activity. I encourage the mirror thing even in this digital age, of course, put them in your daily calendar as well.

 

Here is an example of my personal goals for an SIR meeting in the mid-’90s.

 

    • Gather input for the R&D team, regarding catheter tip shape, length, and stiffness, conduct at least ten private conversations with qualified IR’s.  
    • Contribute to the booth set up by having my product station set up and sparkling clean 30 minutes before the deadline. Write 15 high-quality sales leads per day.
    • Brief the salesforce on my product goals and show messaging 
    • Attend and take notes on three live case presentations relating to SFA stenting, write up and present to the marketing team at the post-show briefing.
    • Identify and sound out a regional level expert KOL in SFA treatments from an influential hospital for potential recruitment to our corporate advisor board.
    • Visit every booth where there was a new competitive product to get a feel for how they merchandise their products and observe and report customer reactions to their new product.
    • Twice daily, check-in with the MRI research team (covertly) to determine how they are progressing with the blinded attribute survey goal of 150 completed the three-day show.

I reviewed this list with my supervisor well in advance of the show, she approved.

 

Did I achieve all the goals? Sadly no. But even missing two, guaranteed that I had optimized my time and reap

ed value from the investment the company had made by sending me to the show.

 

I believe that I was allowed to attend domestic and international congress even during cost-cutting cycles due to my development of personal show goals, routinely meeting those goals, and reporting out my findings in an organized fashion to the organization as a whole.

 

Lesson(s)

 

1. Ensure you get a high rate of return on your investment of time and resource at every trade show you attend no matter what your management level by setting your goals. Know before you go!

 

2. Make sure you complete your personal goals first, then contribute to others achieving theirs’.

 

3. Ensure that the macro goals get incorporated into your objectives.

 

“Experience is what you get, right after you needed it most.”

 

Make it a great day!

 

Tim Walker

 

Tim Walker is the Principal Consultant for The Experia Group. A small consulting firm that specializes in providing experienced and expertise during critical device commercialization phases to increase the probability of success. 

 

One-on-one or team coaching is available.

 

www.theexperiagroup.com. Contact The Experia® Group for a free 30-minute consultation to determine if 30-years of experience can contribute to your success. [email protected].

 

 

 

Are You Ready to Launch?

Set up

Recently I have had two potential clients ask during their free 30-minute consultation if they were ready to launch their new medical devices. Thirty minutes is no-where near enough time to answer that question. As I thought through both scenarios, it occurred to me that I usually ask myself a series of questions when I am trying to make that determination. I am going to share those questions with you in this post.

 

The Process

The questions I usually ask have multiple layers to them and fit into at least six categories. Now, if you think I am over complicating this fundamental question, let me remind you that when I am preparing a launch, I consider over eighty elements in the design. If you are not confident in the answers, a more in-depth review is warranted.

 

The categories won’t be new to you if you have been reading this blog for a while. If you are new, then you will recognize them from Marketing 101.

 

Before you even dive into the next level, ask yourself if there is a launch goal? If you don’t have a clear expectation from the launch of the product, then stop. Work as a group to set a goal that has more than just revenue as the target.

 

Categories (the 4 p’s of marketing[1] + business Process):

    • Product
    • Price
    • Promotion
    • Place
    • Process

 

Considerations for Product

    • Have I demonstrated that the product is safe for the patient, the user, and the environment?
    • Am I sure that I can reliably predict the performance in any situation the device is used?
    • Do I have an evaluation process in place that lets the user see the product in its best light?

Considerations for Price

    •  Do you understand how the price will impact the uptake of the product?
    • Do you have a complete understanding of the reimbursement that the buyer will be eligible for?

Considerations for Promotion

    • Have you validated your value proposition?
    • Have you validated all your clinical claims?
    • Are your promotion claims within the boundaries of your regulatory clearance or approval?
    • Do you have a plan to collect additional clinical evidence in support of your current and future claims?

Considerations for Place (Distribution)

    • Does your distribution channel selection fit with your product?
    • Have you tested your sales process? 
    • Have you adequately designed product and sales training for those who will be representing your product?
    •  Have you tested your in-service procedure?

Consideration for Process

    • Have you developed all the business processes that will allow you to provide high-quality professional service to your customers?

Do you have in place:

        • Complaint handling procedures
        • An escalation process for technical and clinical questions from the field
        • A returned goods process that has the right level of Biohazard safety
        • Environmental considerations

These are just a sampling of the questions you should ask yourself and your team before you authorize the launch. There are many, many, more. The answers are not, yes or no. The implied question is, is there evidence that you have answered these questions correctly. Now is the time to hold each other accountable, no surprises to the best of your resources and abilities.

 

In launching or directing the launch of nearly 100 new medical devices, I have made mistakes. 

Many of those mistakes would have been prevented if I had been honest and thorough in answering the question, “are we ready?”

 

Lesson(s)

 

1. No one wants to fumble the ball in the red zone after driving down the field for months or years.

 

2. Small issues will come up. However, you need to do everything in your power to prevent the big ones.

 

3. The sooner in the launch prep process, you all agree on the “readiness checklist” and the required pre-launch performance and knowledge, the better.

 

“Experience is what you get, right after you needed it most.”

 

Make it a great day!

 

Tim Walker

 

Tim Walker is the Principal Consultant for The Experia Group. A small consulting firm that specializes in providing experience and expertise during critical device commercialization phases to increase the probability of success. 

 

One-on-one or team coaching is available.

 

www.theexperiagroup.com. Contact The Experia® Group for a free 30-minute consultation to determine if 30-years of experience can contribute to your success. [email protected].

 

© 2019, The Experia Group, LLC

 

  [1] McCarthy, 1960

The role of Marketing in Validation testing for Medical Devices

Set up

I had the opportunity to reflect on an experience that I had a few years back. Here is the story. First and most importantly, this post is not an R&D bashing.  As you read the story, you will see that there are plenty of opportunities for improvement by many functional team members as well as culturally throughout the commercialization process.

The Story

I had recently joined a team late in the R&D process as the marketing representative. I was not involved in collecting nor documenting the user needs or technical requirements of the product that was being developed. Not a perfect situation.

The team had completed verification testing and was moving full force into the Validation test phase of development. I asked to review the validation test protocols and was ignored for several weeks, not a good sign. Unfortunately, I had to take my request to the Vice President of Marketing and Vice President of R&D before I could get a copy of the protocol. I had to read the protocol several times before it became clear it was just enhanced verification testing, not real Validation.

I sat down with the team to share my concerns that the test protocol did not link back to user needs. After two hours of going point by point through the protocol, it became clear to all that the protocol did not Validate the user needs. I was told that Marketing did not have to approve validation test protocols, and they were going forward with the test as is.

Completely ignoring the fact that over half of the critical needs were not being challenged. Perhaps more telling was that only team members were conducting the protocols.

What do I do now?

It was clear that there was a cultural issue that would take some time to change. The first line of my marketing ethos requires that patient safety come first, always. I had no choice but to be their advocate on the team. But how? I felt that I needed to make the Validation testing more real for the R&D team.

I took two parallel paths to solve this dilemma. First, I worked with Quality engineering and Regulatory compliance team members to better understand their role in Validation protocol development. They were eventually asked if they would like to see their roles better defined? They agreed and set up a task force to review the roles and responsibility chart in the QS for Validation testing.

Second, I arranged for five physicians and five, field-based clinical specialists to visit with the team. These five physicians had been involved in the needs identification process (almost 3-years earlier). As near as I could tell, they provided the first and only input during the design and development process. This meeting was very structured, and the team explained why they reached the design they had.

In the back of the room restricted to observation only were the functional department heads. Truthfully, I felt terrible for everyone in the room as it became apparent that the team had missed on several fronts.

After three additional months of re-design to eliminate any safety issues, verification, and validation phases were re-started. A total delay in the project launch of six months at the cost of many millions of dollars was the result of this story. Who won in the upheaval, the patients and the clinicians won, which should have meant everyone won, that is not how the company perceived it. The finger-pointing started soon afterward.

In the end, everyone had done their best to do what they individually thought was best for the company and the project. The entire team was made up of competent professionals. No one should have lost their job over this; it was, in essence, a complete failure to understand what the real goal of the project was, a safe, compliant, product that offered solutions to unmet needs of the physician customer.

Marketing’s role in Validation testing

Specifically, marketing represents the customers’ voice on the team. They should be actively involved in every aspect of creating a new product. They need to facilitate access for the R&D team to the customer in the right way at the right time. Should they be required to sign-off on the Validation protocols? I think there is room for discussion about that, however the voice of the customer needs to be heard!

 

I strive to be so valuable to the team that they ask me to be involved with developing the Validation protocols.

Lesson(s)

  1. The clinician customers must have input throughout the development of the new product development process. This input is the only way to prevent costly surprises at the end.
  2. First-time marketers must have a marketing coach to take them through the process. Whether it be, the supervisor or a more experienced marketer, it is essential to know that an inexperienced marketer will not know what to look for.
  3. Marketing serves as the keeper of the new product vision, every chance you get, speak to the vision.

“Experience is what you get, right after you needed it most.”

Make it a great day!

Tim Walker

Tim Walker is the Principal Consultant for The Experia Group. A small consulting firm that specializes in providing experience and expertise during critical device commercialization phases to increase the probability of success.

One-on-one or team coaching is available.

www.theexperiagroup.com. Contact The Experia® Group for a free 30-minute consultation to determine if 30-years of experience can contribute to your success. [email protected].

Available on Amazon.

© 2019, The Experia Group, LLC

Expanded Coaching Opportunities for Medical Device Marketers

Are you stressed?

Is that stress due to a new level of responsibility, a new campaign or project that you haven’t done before? Do you need some practical guidance? From VP of Marketing-to-Associate Product Manager, it can be both exciting and frightening to embrace new challenges.

• New product definitions
• VOC planning and execution
• Tradeshow campaign development
• Strategic planning
• Portfolio rationalization
• Portfolio planning
• Product launches

 

 

 

 

You don’t have to do it alone!

Tim Walker, author of Insights: 33 Lessons Learned in Medical Device Marketing, has announced that he is providing one-on-one or team coaching for those professionals who are expanding their roles or skills set and would like some practical guidance.

• Build confidence
• Add new skills
• Relieve that unhealthy stress
• Feel supported

Declare your interest in living gracefully into the new challenges of your career by contacting Tim; mailto:[email protected].

Relieve some or all of the unhealthy stress and pressure you are feeling, lean on Tim’s experience, expertise, methods, and processes.

“I know I can provide the support you need as I have for so many of those who have worked with me in the past.”

Tim Walker
Author, consultant, coach, and mentor
https://www.linkedin.com/in/meddevicestrategist/

Available on Amazon

Walker Announces one-on-one coaching opportunities for Medical Device Marketers

Are you new to the Medical Device Commercialization world and would like guidance on a new product launch, product messaging, strategic planning, product management, and many more elements of marketing?

Tim Walker, author of Insights: 33 Lessons Learned in Medical Device Marketing, has announced that he is providing one-on-one coaching for those professionals who are new to commercializing medical devices and would like some practical guidance.

Every great athlete in America relies on coaches who have access to processes and methods to reinforce the fundamental. Why not you?

“To excel at the highest level – or any level, really – you need to believe in yourself, and hands down, one of the biggest contributors to my self-confidence has been private coaching.”  Stephen Curry, Golden State Warriors

Stephen CurryAwards  All-NBA Team
NBA Most Valuable Player Award
2016, 2015
All-NBA Team
2019, 2018, 2017, …
NBA All-Rookie Team
2010
Best NBA Player ESPY Award
2015
NBA Community Assist Award
Best Male Athlete ESPY Award
2015
NBA Sportsmanship Award
2011
BET Award for Sportsman of the Year
2019, 2017, 2016, …
Teen Choice Award for Choice Male Athlete
2017, 2016, 2015
Assist of the Year Fan Award
2017
Southern Conference Men’s Basketball Player of the Year
2009, 2008
Best Record-Breaking Performance ESPY Award
2016
Associated Press Male Athlete of the Year
2015
Shorty Award for Best in Sports
2016

Feeling alone, a little overwhelmed, find yourself inventing work processes from scratch? Are you a top performer that suddenly finds themselves supervising others and are not sure how to go about the mentoring and coaching of your team?

Relieve some or all of the unhealthy stress and pressure you are feeling, lean on Tim’s experience, expertise, methods, and processes.

I know I can provide the support you need as I did for Lauren.

Lauren Rhodes, IMBA

Lauren Rhodes, IMBA

Medical Device Marketing/Product Manager

“Few people have the opportunity to work with and learn from a recognized industry expert like Tim Walker during their careers. I am privileged to have been personally mentored by Tim at a start-up medical device company during the launch of our flagship product last year.
Tim’s extensive knowledge and contagious passion for standout medical device marketing have been instrumental to the success of our company and to my own professional development in the medical device industry. His insights enabled us to quickly develop an effective value proposition for our customers, craft unique and consistent product messaging, and launch our product using a results-driven commercialization strategy.”

Declare your interest in living into the new challenges of your career by contacting Tim, send an email to [email protected]. Limited space is available for this new service, so act now.

You don’t have to do it alone!

Tim Walker

Author, consultant, coach, and mentor

Persuasive Power derived from the Benefit Pyramid+™, in Medical Device Marketing

Set up

I saw a half dozen posts this past week that announced New Medical Devices. So this INSIGHT goes out to those product managers that produced those notices.

Was there something inherently wrong in those announcements? No. Could they have been better? Yes. Given that they were merely announcements, they weren’t necessarily intended to convey the entire message. So please take this post as an opportunity to think deeper.

So how could they have been improved?

By applying the lessons of the Benefit Pyramid. Most of the content of the announcements referred to Attributes or Features of the devices. Seen in the image below, Attributes and Features have a low impact when persuading someone to act differently. I would offer that if a message that focuses on features is successful, it is because the clinician is projecting the benefit they might derive from those features. As a product manager, being intentional about messaging you will realize that counting on a very busy clinician to project a benefit is not as strong a position as you telling them how the device will be beneficial to them.

For most of us mortal marketers, we target benefits, for those among us who truly understand the psychographics of their targeted clinician customer we suggest or present an emotional benefit that they derive from using our devices.

In this post, I add one more element, hence the + sign. So this new benefit pyramid represents a change in the way I think about persuading clinicians to change their behaviors. It takes into account the ultimate persuader, a moral or social imperative. The closest I have ever gotten to explain the impact of a product as a moral imperative is when I market a safety device.

One only need look to the writings of the Greek physician Hippocrates to discover aspects of the medical ethos and why they might consider safety and having clinical data as a moral imperative.

Hippocratic Oath:

“I will follow that system of regimen which, according to my ability and judgment, I consider for the benefit of my patients, and abstain from whatever is deleterious and mischievous.”

Of the Epidemics:

“The physician must be able to tell the antecedents, know the present, and foretell the future — must mediate these things, and have two special objects in view with regard to disease, namely, to do good or to do no harm.”

Lesson(s)

  1. The higher up the Pyramid you can go the more power your persuasion will be
  2. Take the time to dig deep to discover the benefit your product will provide
  3. To tap the p persuasive power of the Benefit + Pyramid, you must authentically believe in what you are saying in your messaging

“Experience is what you get, right after you needed it most.”

Make it a great day!

Tim Walker

Tim Walker is the Principal consultant for The Experia Group. A small consulting firm that specializes in providing experience and expertise during critical device commercialization phases to increase the probability of success. www.theexperiagroup.com. Contact The Experia® Group for a free 30-minute consultation to determine if 30-years of experience can contribute to your success. [email protected].

 

© 2019, The Experia Group, LLC

On Amazon.

 

Social Cause Marketing with Medical Devices

Set up

Recently, I had a great discussion with a group of new medical device marketers. It was a great exchange of ideas. One of the topics that struck me was a question from a younger, recent graduate who was starting a career as a product manager.

Which comes first the Social cause or the Product?

The question was something like this, “I have been given the responsibility to launch a new line extension, and I would like to know how I choose the social cause that I use to market the new product?” I thought this was a great question. So I fired back, “What did your manager or director advise you to do?”

The response was, “That they told me if I wanted a great launch, I should leverage a social cause.” Having a social cause affiliated with a product launch can be a strong linkage to the product message and could, for a short time, aid in launching a new product.

An aside

There are several debatable points of view in Marketing, such as, which comes first the Brand or the Product? The Social cause or the Product? Strategy or tactics? To some in our profession, these topics are the same as the “chicken or egg” question.

 

If you have been a loyal reader of this blog, you will recall that I have positions on all three questions. The purpose is never to convince the reader that I am right, but rather to trigger a thought that might lead you to your informed view.

Back to the topic

In my view, we need to recognize that if we align with a social cause, as a company, a division, or a product line that we must make sure our messaging is congruent and authentic.   Without authenticity to the Social cause, it will be a trick. That is why the “Social cause” comes first! If a cause is core to your Brand or that of your company’s then, by all means, your commitment will come across as authentic. It will help explain why. Searching for a cause to attach to a product so that you can gain market leverage is not going to serve anyone over the long-term.

Remember that your Brand comes from who you are, what you believe, your entire life history.

A plea

Please do your homework and look deeper behind all techniques and fads. MVP, Social media, Social cause marketing are all great concepts if they are applied correctly. However, honestly they are just creative ways of using the basics; at the base is and always will be the 4 Ps. I now think of the basics as the 5 Ps and 2 Cs.

  • Product
  • Price
  • Place
  • Promotion
  • Process
  • Customer
  • Competition

Ask yourself, what is my Brand? Who am I at my core? Be true to that core.

There are two more blog posts under development right now.   Watch for, “A return to the basics of messaging,” and “The Marketing Ethos for Medical Device Marketers, “both post coming soon.

Lessons

  1. Social cause marketing is power if it is real and is congruent with your product message.
  2. Tricks to promote a product are disingenuous and may work for a while, but won’t produce a positive long-term result.

“Experience is what you get, right after you need it most.”

Make it a great day!

Tim Walker

Tim Walker is the Principal consultant for The Experia Group. A small consulting firm that specializes in providing experience and expertise during critical device commercialization phases to increase the probability of success and relieve unhealthy tension. www.theexperiagroup.com. Contact The Experia® Group for a free 30-minute consultation to determine if 30-years of experience can contribute to your success. [email protected].

If you would like to own a collection of 33 lessons learned, Search Amazon for INSIGHTS: 33 lessons learned in medical device marketing.

© 2019, The Experia Group, LLC

Beware of bad data in Medical Device marketing decision-making

Set up
I was listening to an MLB game the other evening and the announcers we spouting statistics right and left. They were reporting data. I then waited for the analysis, for the insight, for the reasoning that explained an action taken by a manager or player. We never got there.

I turned off the TV and realized that the announcers for that game were doing what I see prevalent today in inexperienced marketers.

Collecting data without knowing why they are gathering it and then spouting that data as if there was some type of magic in numbers.  The magic comes from deriving (analysis) from the data insight, converting that insight into wisdom by contextualizing it and then applying that new wisdom to form a solution or make a great decision.

Is there a time and place for making observations, collecting subjective data? Absolutely. It is the source for developing the questions or problem statements that you will then apply the “scientific method” against.

An Example

An example of the power of observation: I was in an open-heart case, and the perfusionist and I were talking about how cold they keep the OR rooms. She had three layers of jackets on (observation 1). The conversation continued, and she made the point that they are trying to cool the heart to protect it. One way they do that is by recirculating cold water around the heart and pumping a cardioplegia solution into the heart itself. By having the OR rooms too warm, they are defeating that goal. That made sense to me. Then I noticed that the source of the cold fluid was being pumped through 6 feet of tubing (observation 2). The question that resulted was, is there a way to get the cooling source closer to the heart, so the ambient temperature does not have time to impact the fluid adversely and is there a new product opportunity to be realized?

These observations resulted in two streams of exploration, 1) a technical stream, and 2) a marketing stream.

This blog is not about how to analyze data. However, instead, to caution that unless you are willing to collect the data correctly, then don’t start, garbage in, garbage out.

When do you need to collect data?

Recently, I have been mentoring several individuals who are new to marketing as a role. They struggle with determining when and how to collect voice-of-the-customer (VOC) data, as did I for the first 5-years of my career in marketing. The answers are painfully simple. How to do it well is difficult and takes years of experience.

The answer is to collect VOC data whenever you have an unanswered question.

Does that mean that you need to collect data for every marketing question? Yes, you do. However, how much data, what kind of data, how you gather that data, from how many, of what types of customers, is where you can apply judgment. Save the significant data collection efforts for the huge questions, ones where a wrong answer or misinterpretation could cause severe negative consequences if it leads to a poor critical decision.

Commit to writing could questions

So once you decide that you have a critical unanswered question, you have to frame the question (s). The better the question (s), the more informed the decision.

I typically will rewrite the questions up to a dozen times. With each revision, I work hard to remove any real or implied bias.

Data’s value comes from using it to inform a decision-making process. If you’re lucky, you will convert data to information, information to insight, insight to wisdom, and then apply that wisdom to excellent decision-making.

Lessons

  1.  Most of the time, biased data is worse than no data.
  2. Spend all the time that you require to frame great, unbiased questions.
  3.  Risk adjust your VOC efforts to optimize the value of the undertaking.

“Experience is what you get, right after you need it most.”

Make it a great day!

Tim Walker

Tim Walker is the Principal consultant for The Experia Group. A small consulting firm that specializes in providing experience and expertise during critical device commercialization phases to increase the probability of success. www.theexperiagroup.com. Contact The Experia® Group for a free 30-minute consultation to determine if 30-years of experience can contribute to your success. [email protected].

© 2019, The Experia Group, LLC

Brand vs. Branding in Medical Device Marketing

Set up

I have experienced/observed that business professionals who are not familiar with the nuance of marketing get confused between the Brand and Branding. I have found myself explaining the difference multiple times over the last few months, so here is how I think about it and explain it. You may find it useful if you ever need to explain the differences yourself.

Summary

Your brand is who you are, an internal facing belief system; branding is how your brand manifests itself outward toward your customers, your market, the world at large.

You cannot do branding without first being crystal clear about your brand. Getting clear on your brand is a profoundly unique discovery process that is at your or your products core and comes from your or your products history. It is the most authentic aspect of your company or product. If you are a new company, it may be a confluence of the founders’ personal histories.

Many companies /products have a name, a logo, a color preference, etc. These are all representations of your brand. If the outward expression of your brand is inconsistent with the brand, then your customers will be confused.

Having an understanding of the difference between the brand and branding, take a minute to reflect on the recent McDonalds attempt at deluxe burgers. Custom made to order specialty burgers.   When they announce this program, it was crystal clear that they were moving outside of their core value, their brand. McDonald’s is known for and was created from, a belief that customers wanted a quick, convenient, consistent meal that had good taste.

So they based their success on location, consistency of product, and a standardized menu. For decades that is what the golden arches stood for. They have just recently announced that they are discontinuing the specialty burger menu option.

Changing your brand is a challenge; it is tantamount to changing history, changing who you are.

Living into your Brand

Do you have to perfect in your branding on day one? No. However, you do have to be crystal clear on your brand.

Lesson

Look deep within to discover or reveal your brand, first.

“Experience is what you get, right after you need it most.”

Make it a great day,

Tim Walker

Tim Walker is the Principal consultant for The Experia Group. A firm that specializes in providing experience and expertise during critical device commercialization phases to increase the probability of success. www.theexperiagroup.com. Contact The Experia Group for a free 30-minute consultation to determine if 30-years of experience can contribute to your success.

© 2019, The Experia Group, LLC

 

 

MVP a potentially dangerous concept for the Medical Device Sector

Forward

I don’t typically repeat topics in this blog. However, I am making an exception this time. This is the third post related to the use of the Minimally Viable Product (MVP) concept with Medical Devices.

Set up

Recently, I had an email exchange with a potential client where they informed me that they were pursuing an MVP and they didn’t need any marketing support at this time. I may write a post about how that may be misguided thinking if there isn’t a Marketing Mindset in the company.   Marketing Mindset will be the subject of a future post as well. That e-mail exchange triggered an emotional response within me.

I offer this post because I feel compelled to. The Universe woke me up at 3:00 am last night to inform me that my mission in life demands that I caution inventors, scientists, engineers, entrepreneurs, investors and product marketers that are involved with product commercialization where human safety or health is at risk, that the MVP concept can be misinterpreted.

MVP is a useful concept as defined by Eric Ries; “A minimally viable product is that version of a new product which allows a team to collect the maximum amount of validated learning about customers with the least effort.” I am sure that there are many industries where this definition can be applied directly. It seems particularly applicable to entertainment sectors, like video games. I strongly recommend that everyone who is using that term, reflect on if it is a thought construct that is appropriate for his or her market sector.

In the example above, the first set of drawings do not provide full utility. The second example does. This concept applied to medical devices gets at the need for complete clinical utility (CCU).

Cautionary Note

For me, what I have come to believe is the concept of safe, complete clinical utility (CCU) is the way to think about the first product to be launched by a company or a technology platform in the medical device space. In the medical device space or any space where human lives are at risk, we should never strive for a minimum of anything.   I have found that the long-term success of any product results from maximums, maximum utility, maximum compliance, maximum clinical evidence, and maximum safety.

If you want to use a hot buzzword like MVP in a high-risk space, then I think it will be worth your time to define the scope of “Viable” for your product. It will show the clinicians, investors, and patients that you understand where their health is concerned that Viable is a big word and includes, regulatory compliance, safety, and complete utility.   If you must put the acronym on a slide, then do it this way – mVp.

For those of you who are involved in the acquisition of technologies or products that can present a risk to humans make sure you do more than financial due diligence. Be intentional about your technical and clinical due diligence as well. If you are new to M&A activity, hire a coach who has been there and done that. I have seen first hand the results of poor clinical and technical due diligence. Large follow on investment in the millions of dollars, months of delays, failed launches, investors losing confidence in management teams, negative impact to the brand, and of course worst of all, a patient injury that may result from truncated due diligence!

Marketing Mindset

What I believe is that if you have and apply a Marketing Mindset to product commercialization you will think in terms of multi-generation product releases that move you toward 100% customer satisfaction.

Lesson

Words matter, using a popular buzzword implies knowledge of the thoughts behind the term. Don’t be caught unprepared or leave an opening for misinterpretation.

“Experience is what you get, right after you need it most.”

Make it a great day,

Tim Walker

Tim Walker is the Principal consultant for The Experia Group. A small consulting firm that specializes in providing experience and expertise during critical device commercialization phases to increase the probability of success. www.theexperiagroup.com. Contact The Experia Group for a free 30-minute consultation to determine if 30-years of experience can contribute to your success.

© 2019, The Experia Group, LLC